| Type of Sample / Test | Test Description | Standard | HOKLAS Accreditation |
| Metallic Materials | Tensile test of reinforcing bars, wire rods, welded fabrics or cold reduced wires for reinforcement of concrete in the force range 3 kN - 2000 kN | BS EN ISO 6892-1: 2019 Cl. 10.3.3 Method B | Yes |
| in conjunction with the following specification(s): |
| BS 4449: 1997 Cl. 11.1 & 11.2 |
| BS 4449: 2005 + A2: 2009 Cl. 7.2.2, 7.2.3, 8.1.3.1 & 9 |
| BS 4482: 1985 Cl. 12.1 & App. C.3 |
| BS 4482: 2005 Cl. 8.1.3.1 & 9 |
| BS 4483: 1998 Cl. 13.1 |
| BS 4483: 2005 Cl. 7.2.2, 7.2.3, 8.1.3.1 & 9 |
| BS EN ISO 15630-1: 2002 Cl. 5 |
| BS EN ISO 15630-2: 2002 Cl. 5 |
| CS2: 2012 (Rev. 6) Cl. 6.1 & 6.4 |
| Metallic Materials | Rebend test of reinforcing bars, wire rods, welded fabrics or cold reduced wires for reinforcement of concrete | BS EN ISO 15630-1: 2002 Cl. 7 | Yes |
| CS2: 2012 (Rev. 6) Cl. 6.1 & 6.5 |
| in conjunction with the following specification(s): |
| BS 4449: 1997 Cl. 11.3 & App. E.1.6 |
| BS 4449: 2005 + A2: 2009 Cl. 7.2.5 & 9 |
| BS 4482: 1985 Cl. 12.2 & App. C.5 |
| BS 4482: 2005 + Amd. 1: 2007 Cl. 7.2.4 & 9 |
| BS 4483: 1998 Cl. 13.1 |
| BS 4483: 2005 Cl. 7.2.5, 8.1.3.2 & 9 |
| Rebar | Mass per meter of steel reinforcing bars | BS EN ISO 15630-1: 2002 Cl. 12 | Yes |
| CS2: 2012 (Rev. 6) Cl. 6.1 & 6.2 |
| in conjunction with the following specification: |
| BS 4449: 2005 + A2: 2009 Cl. 7.2.2, 7.3 & 9 |
| Rebar | Bond property of steel reinforcing bars by surface geometry measurement | CS2: 2012 (Rev. 6) Cl. 6.1 & 6.7.2 | Yes |
| Coupler | Tensile test & slip/permanent elongation test of a mechanical coupler for reinforcing bar in the force range 3 kN 2000 kN | BS EN ISO 6892-1: 2016 Cl. 10.3.3 Method B | Yes |
| & ISO 15835-2: 2018 Cl. 5.4 excluding Cl. 5.4.4 |
| BS EN ISO 6892-1: 2019 Cl. 10.3.3 Method B |
| & ISO 15835-2: 2018 Cl. 5.4 excluding Cl. 5.4.4 |
| in conjunction with the following specification(s): |
| BS 8110: Part 1: 1997 Cl. 3.12.8.16.2 |
| General Specification for Civil Engineering Works (2006) Vol. 2 Cl. 15.35 |
| Buildings Department Code of Practice for Structural Use of Concrete (2013) Cl. 3 8.3 |
| General Specification for Civil Engineering Works (2020) Vol. 2 Cl. 15.35 |
| Structural Steel | Tensile test of of structural steel section in the force range 3 kN - 2000 kN | BS EN ISO 6892-1 : 2016 | Yes |
| BS EN ISO 6892-1 : 2009 |
| BS EN ISO 6892-1: 2019 |
| BS EN 10002-1 : 2001 |
| in conjunction with the following specification(s): |
| BS EN 10025-1 : 2004 C l. 10.2.1 |
| BS EN 10025-2 : 2004 Cl. 10.2 |
| BS EN 10113-1 : 1993 Cl. 8.6.2.1 |
| BS EN 10113-2 : 1993 Cl. 7.4.1 |
| BS EN 10113-3 : 1993 Cl. 7.4.1 |
| BS EN 10155 : 1993 Cl. 8.7.2.1 |
| BS EN 10137-1 : 1996 Cl. 8.5.2.2 |
| BS EN 10137-2 : 1996 Cl. 7.4.1 |
| BS EN 10210-1 : 2006 Cl. 9.2 |
| BS EN 10219-1 : 2006 Cl. 6.7.1 & 9 .2 2 |
| Structural Steel | Tensile test of metallic materials in the force range 3 kN - 2000 kN | EN 10002-1 : 2001 | Yes |
| BS EN ISO 6892-1: 2009 |
| BS EN ISO 6892-1: 2016 |
| BS EN ISO 6892-1: 2019 |
| Coupler | Static tension test, static compression test, cyclic tension & compression tests for mechanical connector systems (Type 2 Splice) for steel reinforcing bars in the force range 10 kN - 2000 kN | ICC Evaluation Service, Inc. AC133 | Yes |
| (Approved May 2008, Effective 1 Jun 2008) Cl. 4.1.2 |
| ICC Evaluation Service, Inc. AC133 |
| (Approved May 2008, Effective 1 Jun 2008) Cl. 4.1.2 with modifications |
| ICC Evaluation Service, Inc. AC133 |
| (Approved Jan 2010 , Effective 1 Ju l 2010 ) Cl. 4.1.2 |
| ICC Evaluation Service, Inc. AC133 |
| (Approved Jan 2010, Effective 1 Jul 2010) Cl. 4.1.2 with modifications |
| Buildings Department Co de of Practice for Structural Use |
| of Concrete (2013) Cl. 3 8.4(b), (c) & (d) |
| Metallic Materials | Charpy V notch i mpact test of metallic materials | BS EN ISO 148--1: 2016 |
|
| in conjunction with the following specification(s): |
| BS EN 10210-1: 2006 Cl. 9.3 |
| BS EN 10219-1: 2006 Cl. 9.3 |
| BS EN 10025-1: 2004 Cl. 10.2.2 |
| BS EN 10025-2: 2004 Cl. 10.2 |
| BS EN 10025-4: 2004 Cl. 10.2 |
| Metallic Materials | Vickers hardness test of metallic materials | BS EN 23878 : 1993 | Yes |
| BS EN ISO 6507-1 : 2005 |
| Metallic Materials | Pitch and mass per metre square of steel fabric for reinforcement of concrete | BS 4483: 1998 Cl. 6 & 10 | Yes |
| BS 4483: 2005 Cl. 7.3 & |
| General Specification for Civil Engineering Works (2020) + Amd. 1/2025 Vol. 2 Section 15 |
| Metallic Materials | Weld shear force test of steel fabrics for reinforcement of concrete | BS EN ISO 15630-2: 2002 Cl. 7 | Yes |
| ISO 10287: 1992 |
| in conjunction with the following specification(s): |
| BS 4483: 1998 Cl. 13.2 |
| BS 4483: 2005 Cl. 7.2.2 & 7.2.4 |
| Metallic materials (non destructive) | Ultrasonic test of H beams with parallel flanges and IPE beams (manual method) | BS EN 10306 : 2002 | Yes |
| Ultrasonic test of steel flat products (reflection method) | BS EN 10160 : 1999 | Yes |
| Ultrasonic test of steel plate, strip and wide flat (manual method) | BS 5996 : 1993 | Yes |
